TP S-50

The type series model TP S-50 has been especially developed to dose small volumes discontinuously. An easy replacement of tubing or the complete change of the pump casing is quickest possible guaranteed.

The 3 roller system provides for a relatively continuous volume.
With a wall size of 1.0 mm 3 different internal diameter of tubing are available; optionally 1.0 mm, 2.0 mm or 3.0 mm

• Pumphead in black polyamide
• 3 roller rotor
• Flow rates up to 50 ml/min.
• 12 V DC gear motor in three different types
• Nominal voltage 12 V DC
• Operational voltage from 6 to12 V DC
• Current consumption approx. 200 mA
• H 50,4 mm x W 39,2 mm x D 79,8 mm
  
  
  
  Mentioned flow rate has been determined with an operational voltage of 12 Volt.
  RPM can be decreased by voltage reduction.
  
  
  
  Pumphead:
  
  Easy replacement of tubing by opening the retaining bracket.
  Comfortable change of tubing or of the pump casing
  .