TP 4000
The TP 4000 is a high performance and versatile peristaltic pump.
The pump is available with roller sizes to match either 2.4mm wall tubing. A set of replaceable inserts secures the various tube
sizes firmly in position.
The hinged lid forms an integral part of the pump construction and
the use of a tube replacement lever facilitates the replacement of
tubing. The lid can be removed completly for tube replacements in tight
assembly spaces.
These pumps are not suitable in conjunction with life
support equipment or any in-vivo application.
- Rollers in 2XPOM
- Pump housing material in glass filled Polypropylene
- Rotor material in PPS Ryton
- Hinged Cover in clear Polycarbonate
- Flow rates up to max. 3,8 L/min.
- 3 different gear by the DC standard motor available -
100, 170 or 280 rpm
- High quality valeo motor with 24V DC an approx
270 rpm
- Tube material: Santoprene, Tygon, Silicone, Prothane
- Dimension of the pump with 24V DC standard motor:
H 117,40 x W 116,0 x L 149,30 mm
- Weight with standard motor approx. 1,2 kg
The flow rates have been measured after 20 minutes running the
pump. Water was pumped by room temperature without any pressure.
Silicone tube was tested. Other materials may cause different results.
A set of replaceable inserts secures the various tube size firmly in position.
Pumphead:
Compact pump design with yellow clip for easy openening and closing
the cover. Special hand tool for running the motor by hand for easy
replacement of tubing.
A set of replaceable inserts secures the various tube size firmly
in position. Continuous tubing.
|
|

Flow rates up to max. 3,8 L/min
|