The TP 3005 is a very robust small peristaltic pump for intermittent
OEM aplications.
The tubing with wall sizes of 1.6 mm are assembled with PP connectors.
You can use tubes with 3.2 or 4.8 mm internal diameter.

These pumps are not suitable in conjunction with life
support equipment or any in-vivo application.

• Pumphead in clear Polycarbonate
• Mounting Plate in black Polycarbonate. 2 lengths available
• 2 roller rotor in black Polycarbonate
• Rollers in Nylon GK
• Flow rate up to 812 ml/min. max
• AC asynchronous shade pole motor 24V, 110V, 220V
  50 or 60hz
• DC permanent magnet motor with 12 or 24V
• Speed by AC: 82, 175, 240 or 325 rpm
  other speeds possible if required
• Tube materials: Santoprene, Tygon, Norprene, Prothane
  and Silicone. Other materials possible if required
• Dimensions pumphead: 86,1 x 66,50 x 34,55 mm
• Weight: with DC motor approx. 0,55 kg - with AC motor
  up to max. 1,6 kg
  

The flow rates have been measured after 20 minutes running the pump.
Water was pumped by room temperature without any pressure. We tested with Silicone tube. Other materials may cause different results.

Pumphead:

Easy tube changing by opening 3 screw fittings from the
housing. Easy changing of the tube which is assembled
in the housing.